Anywire ASLINKER BL2LN87SB-02D CC20 Series, Руководство по продукту системы

Страница: 4 / 20

-BL2LN87SB02D*CC20 4/20-
○ ○ ○
×
○ ○ ○ ○
○ ○ ○
×
○
Lot No. 19ECBNB
Connection targets Specifications Model Functions
Functions
Address
* 1 It depends on lot No. whether this function is available or not.
*
2 This terminal can be used in connection to the AnyWireASLINK unit for word transmission. Note that this terminal cannot handle word data by setting a word address.
*
3 To use these functions, a master unit that supports each function is required. For details, refer to the manual for the master unit together with this manual.
* 4 This terminal can be used in connection to the AnyWireASLINK unit for word transmission. Note that this terminal cannot handle word data by setting a word address.
* 5 The single unit simplified replacement function works even if the lot No. does not support the LED indication for the single unit simplified replacement function.
(When the master unit executes the single unit simplified replacement function, addresses/parameters will be written, if specified conditions are satisfied.)
[Functions]
Bit
transmission
ASLINKER
4-wire (isolated)
cable type
General-purpose
sensors
General-purpose
switches
Word
*
1
*
2
transmission
Single unit
simplified
replacement
*
3
Remote
address
change
*
3
Detection of sensor cable
disconnection
2-wire type
sensor
3-wire type
sensor
Bit
address
setting
Slave unit voltage
drop
Sensing level drop I/O disconnection I/O short-circuit
I/O power supply
drop
Word
address
setting
■
Detecting functions (Status details)
Lot No. is indicated on the lot label.
Example:
■
How to check
Word transmission
*
4
LED indication for single unit
simplified replacement function
*
5
Alarm bit setting
(Equipment parameters 5 and 13)
Lot No.
Available with S/W version “B” or later version
(If lot No. is indicated in 3 digits (year and
month only), these functions are not available.)
This unit has undergone addition of functions and change of specifications according to version upgrading.
Available functions and specifications of the unit vary depending on lot No.
[Function Compatibility by Lot No.]
Back of this unit
Function
S/W version
Function version
H/W version
NPN input: 2 points
PNP input: 2 points
Alarm bit: 2 points
*
1