-BL2LN87SB02D*CC20 18/20-
1
0000
Factory setting: 0003
0001
0002
0003
3
0000
0001
0002
0003
13
0000
0001
0002
0003
0005
0004
0006
4
0000
0001
0002
0003
2
0000
Factory setting: 0000
Factory setting: 0000
7 to 11
0001
12
0000
0001
Factory setting: 0000
6
0000
0001
Factory setting: 0000
5
0000
0001
Factory setting: 0000
0002
15 to 19
Factory setting: 0000
14
0000
0001
Disconnection
monitoring function
setting
Disconnection
detection enabled
CH setting
Power supply line
disconnection
information
*
For read only
Signal line
disconnection
information
*
For read only
Alarm information
output destination
setting
Signal line
disconnection
clear command
Short-circuit
notification cancel
setting
Alarm information
notification
pattern setting
Short-circuit
notification
cancel command
Spare
Used to specify whether the
disconnection detecting function is
enabled or disabled.
Used to specify a number of input
channels subject to this function when the
disconnection detecting function is used.
Used to check power supply line
information when disconnection is
detected.
Used to check signal line information
when disconnection is detected.
Used to specify alarm information
output destination in the input area of
the resend unit.
Used to clear a signal line
disconnection error.
Used to specify how to clear
short-circuit status after short-circuit is
detected.
Notification by differentiating disconnected
CH (When ALM bit is normal: OFF)
Notification by differentiating disconnected
CH (When ALM bit is normal: ON)
Notification by differentiating disconnected
CH and short-circuit/power supply drop
(When ALM bit is normal: ON)
Notification by differentiating sensor cable
error/voltage drop
(When ALM bit is normal: OFF)
Notification by differentiating sensor cable
error/voltage drop
(When ALM bit is normal: ON)
Notification by differentiating disconnected
CH and short-circuit/power supply drop
(When ALM bit is normal: OFF)
Used to specify an alarm information
notification pattern.
Used to clear a short-circuit error when
short-circuit notification cancel setting
is “manual restoration.”
Spare
[Equipment Parameters and Their Settings]
Equipment
parameter
Setting item
Description
Variable
Description
Disconnection detecting function OFF
Monitoring enabled for power supply line only
Monitoring enabled for signal line only
Monitoring enabled for both power supply and signal lines
Both IN0 and IN1
IN0 only
IN1 only
Normal
Disconnection of IN0 only
Disconnection of IN1 only
Disconnection of both IN0 and IN1
Normal
Disconnection of IN0 only
Disconnection of IN1 only
Disconnection of both IN0 and IN1
Subsequent to input signal
Latter half of input information area
Clear command OFF
Clear command ON
Automatic restoration
Manual restoration
Alarm notification OFF
Cancel command OFF
Cancel command ON
