Anywire ASLINK BL296 B-08F V50 Series, Руководство по эксплуатации продукта

Страница: 15 / 22

6.8k
24V
DN (Black)
DP (Red)
IN
0V
0V
24V (Green)
0V (White)
6.8k
24V
24V
OUT
0V
IN
0V
24V
OUT
24V
0V
24V
0V
OUT
IN
-BL296*B08F****V50 15/22-
DN (Black)
DP (Red)
24V (Green)
0V (White)
DN (Black)
DP (Red)
24V (Green)
0V (White)
DN (Black)
DP (Red)
24V (Green)
0V (White)
＜
Circuit conditions
＞
4-wire (isolated) ASLINK terminal
(Power supply of the AnyWire system)
Load driven by
an external power supply
4-wire (isolated) ASLINK terminal
(Power supply of the AnyWire system)
Load driven by
an external power supply
[Configuration and Electrical Characteristics of the Input and Output Circuits]
＜
Circuit conditions
＞
Rated input voltage:
Max. switching current:
ON current:
OFF current:
ON voltage:
OFF voltage: 24V DC
3.5mA
2.2mA or more
1mA or less
16V or more (24V-IN)
8V or less (24V-IN)
Withstand voltage:
Max. ON current: 30V DC
100mA
Inter
nal cir
cuit
To connect loads (e.g. I/O ports) that
are controlled with a power supply
other than the one used for the
AnyWireASLINK system, always use a
4-wire (isolated) terminal.
Otherwise, malfunction may be caused.
[E.g.]
Use the device by connecting the 0V
lines together.
Inter
nal cir
cuit
Contr
ol cir
cuit
Inter
nal cir
cuit
Load
Inter
nal cir
cuit
Contr
ol cir
cuit
4-wire (isolated) NPN input
BL296SB-08F-
□□
-V50
BL296XB-08F-
□□
-V50 (Input)
Switch, sensor, etc.
(2-wire type)
To connect loads (e.g. I/O ports) that
are controlled with a power supply
other than the one used for the
AnyWireASLINK system, always use a
4-wire (isolated) terminal.
Otherwise, malfunction may be caused.
[E.g.]
Use the device by connecting the 0V
lines together.
CAUTION
4-wire (isolated) NPN output
BL296PB-08F-
□□
-V50
BL296XB-08F-
□□
-V50 (Output)
CAUTION
To connect
inductive load, use
a surge killer.
If output is turned
ON with the OUT
and 24V terminals
short-circuited,
the output device
will be damaged.