Anywire ASLINK BL296 B-08F V50 Series, Руководство по эксплуатации продукта

Страница: 10 / 22

24V
0V 0V 0V 0V
0V 0V 0V 0V
24V 24V 24V 24V 24V 24V 24V 24V
IN0 IN2 IN3 OUT0 OUT1 OUT2 OUT3 IN1
-BL296*B08F****V50 10/22-
0 1 2 3 4 5 6 7 0V 0V 0V 0V
0V
24V 24V
0V
24V 24V
0V
24V 24V 24V
0V
24V
IN0 IN1 IN2 IN3 OUT0 OUT1 OUT3 OUT2 0V 0V 0V 0V
0V
24V 24V
0V
24V 24V
0V
24V 24V 24V
0V
The 24V terminal of the transmission line connection cable is internally connected to
the 24V pin of the terminal block. The 0V terminal of the transmission line connection
cable is internally connected to the 0V pin of the terminal block. Terminals of the
same symbol are internally connected with each other.
24V-0V terminals of the terminal block can be used to connect sensor power supply
and output equipment power supply. (One common per 2 points)
24V-0V total current: 0.8A max.
The 0 to 7 terminals of the terminal block are used to connect input equipment
(sensor, switch, LED, solenoid valve, etc.).
[Terminal Layout (Spring Terminal Block)]
DP (Red): Transmission line (+)
DN (Black): Transmission line (-)
24V (Green): Power supply (+)
for terminal and connected load drive
0V (White): Power supply (-)
for terminal and connected load drive
The 24V terminal of the transmission line connection cable is internally connected to
the 24V pin of the terminal block. The 0V terminal of the transmission line connection
cable is internally connected to the 0V pin of the terminal block. Terminals of the
same symbol are internally connected with each other.
24V-0V terminals of the terminal block can be used to connect sensor power supply
and output equipment power supply.
24V-0V total current: 0.8A max.
The IN0 to IN3 terminals of the terminal block are used to connect input equipment
(sensor, switch, etc.).
The OUT0 to OUT3 terminals of the terminal block are used to connect output
equipment (LED, solenoid valve, etc.).
DP (Red): Transmission line (+)
DN (Black): Transmission line (-)
24V (Green): Power supply (+)
for terminal and connected load drive
0V (White): Power supply (-)
for terminal and connected load drive
■
(Input) BL296SB-08F
□
-3-V50
■
(Output) BL296PB-08F
□
-3-V50
■
(Input/output mixed) BL296XB-08F
□
-3-V50
Input Input Output Output
Spring terminal block
5.08mm pitch
Applicable core wire size: 0.08 to 2.5mm
2
Stripped wire length: 5 to 6mm
*
To connect two wires to one terminal,
collect the wires with “twin ferrule”
(crimping bracket), and insert them into the
terminal together.
■
Specifications of terminal block