0
1
4
5
0V
24V
0V
24V
0V
24V
0V
24V
2
3
6
7
24V 0V 24V 0V 24V 0V 24V 0V
IN0 IN1
OUT0 OUT1
IN2 IN3
OUT2 OUT3
0V
24V
0V
24V
0V
24V
0V
24V
IN0 IN1
OUT0 OUT1
IN2 IN3
OUT2 OUT3
-BL296*B08F****V50 9/22-
The 24V terminal of the transmission line connection cable is internally connected to
the 24V pin of the terminal block. The 0V terminal of the transmission line connection
cable is internally connected to the 0V pin of the terminal block. Terminals of the
same symbol are internally connected with each other.
24V-0V terminals of the terminal block can be used to connect sensor power supply
and output equipment power supply. (One common per 2 points)
24V-0V total current: 0.8A max.
The 0 to 7 terminals of the terminal block are used to connect input equipment
(sensor, switch, LED, solenoid valve, etc.).
[Terminal Layout (Standard Terminal Block)]
DP (Red):
Transmission line (+)
DN (Black): Transmission line (-)
24V (Green): Power supply (+)
for terminal and connected load drive
0V (White): Power supply (-)
for terminal and connected load drive
The 24V terminal of the transmission line connection cable is internally connected to
the 24V pin of the terminal block. The 0V terminal of the transmission line connection
cable is internally connected to the 0V pin of the terminal block. Terminals of the
same symbol are internally connected with each other.
24V-0V terminals of the terminal block can be used to connect sensor power supply
and output equipment power supply. (One common per 2 points)
24V-0V total current: 0.8A max.
The IN0 to IN3 terminals of the terminal block are used to connect input equipment
(sensor, switch, etc.).
The OUT0 to OUT3 terminals of the terminal block are used to connect output
equipment (LED, solenoid valve, etc.).
DP (Red):
Transmission line (+)
DN (Black): Transmission line (-)
24V (Green): Power supply (+)
for terminal and connected load drive
0V (White): Power supply (-)
for terminal and connected load drive
Input
Output
Standard terminal block
M3, 7.62mm pitch
Width: 6mm, Y-terminal, round terminal
Tightening torque (N·m): 0.5 to 0.8
■
Specifications of terminal block
■
(Input) BL296SB-08F
□
-V50
■
(Output) BL296PB-08F
□
-V50
■
(Input/output mixed) BL296XB-08F
□
-V50
