Anyload 805BS Series, Руководство пользователя

Страница: 45 / 51

- 43 -
Fig. 8-6 Print Format Command Transmission Sequence
Note: When <G/N> is ‘G’ (ASCII 72), the format followed is the gross weight print mode
(GFMT). When <G/N> is ‘N’ (ASCII 78), the format followed is the net weight print
mode (NFMT). Refer to Section 7 regarding GFMT and NFMT.
Indicator respond format : Correct transmission “OK”, Incorrect transmission “??”.
Example: PC sends gross weight print command to indicator <G>GROSS<NL><E>
PC sends :
01H
，
31H
，
02H
，
46H
，
10H
，
47H
，
3CH
，
47H
，
3EH
，
47H
，
52H
，
4FH
，
53H
，
53H
，
3CH
，
4EH
，
4CH
，
3EH
，
3CH
，
45H
，
3EH
， 3FH
Indicator responds : 01H
，
31H
，
02H
，
4FH
，
4BH
， 03H
，
37H
8.3 Serial Communication Tests
Connect 2 indicators, A and B, according to Fig. 8-7. Set indicator A to Data Transmitted
upon Request (F4.4=1) according to Section 8.1, and set the same parameters for F4.1,
F4.2 and F4.3 of both indicators.
Perform serial communication test as follow :
（ 1 ） Set indicator B to Configuration mode. B display shows “F1”.
（
2
）
Press until B display shows “F4” (see Fig. 8-1). Press to go to F4 Menu.
B display shows “F4.1”.
（
3
）
When B display shows “F4.1”, press until B display shows “F4.5”.
（ 4 ） When B display shows “F4.5”, press . B indicator sends command to A indicator,
and receives response data from A indicator. There are following possible