6.
Start up
Connect power supply. For the 805TS
, the indicator automatically goes through
a self checking process (showing all 0 to all 9, decimal point and indicator lights).
For the 805BS series,
pressing on the ON/OFF button on the front panel for 2
seconds to turn on the power. Once on, the indicator will
proceed with the self
checking process. There are two possible outcomes depending on F1.8 and F1.9
Menu settings:
o
When indicator is set to Auto Zero and Manual Zero (F1.8=0 and
F1.9=0, respec
tively and the load on the scale is within the zero scale
setting in F1.3 Menu,
the indicator zeros automatically or manually and
display shows “0”.
o
Otherwise if F1.8=1 &
F1.9=1, the indicator is set not to Auto
Zero/Manual Zero. If the load exceeds the zero scale setting in F1.3
Menu, display shows actual load.
Refer to F1.3 Menu along with the F1.8 & F1.9 Menu for further information.
7.
Operations
The indicator goes to Weighing mode when the SW2 switch is turned off. Under
the Normal Weig
hing mode,
the Peak mode and Count mode can be set at F5.1
Configurations Menu (refer to F5.1 Menu).
7.1 Normal Weighing Mode
When the indicator is set to Normal Weighing Mode, the parameter value in
F5.1 should be F5.1=0 (refer to F5.1 Menu).
For 805TS
(F5.1=0),
the “Peak” light and “Count” light are off. Indicator is in
Normal Weighing mode.
For the 805BS series
(F5.1=0),
both “Peak” and “Count” symbols won’t appear in
the display. Indicator is in Normal Weighing mode.
Basic operations in Normal Weighing mode:
7.1.1 Gross/Net Mode
8
|
ANYLOAD 805TS & 805BS Series Weighing Indicator Operations Manual (v1703)
