background image

MSS-200 MINI SPATULA STEAMER

2

P/N 1010903 Rev. A 09/05 

General

The MSS-200 Mini Spatula Steamer produces steam using 

plain tap water for quick steaming of products.  Simple push 

button action delivers a consistent impulse of steam, produc-

ing a uniform finished product from one operator to the next.
This manual provides the safety, installation, and operating 

procedures for the Mini Spatula Steamer. We recommend 

that all information contained in this manual be read prior to 

installing and operating the unit. 
Your Mini Spatula Steamer is manufactured from the finest 

materials available and is assembled to Roundup’s strict 

quality standards.  This unit has been tested at the factory to 

ensure dependable trouble-free operation. 

Warranty Information

Please read the full text of the Limited Warranty in this man-

ual.
If the unit arrives damaged, contact the carrier immediately 

and file a damage claim with them.  Save all packing mate-

rials when filing a claim.  Freight damage claims are the 

responsibility of the purchaser and 

are not

 covered under 

warranty.

OWNER INFORMATION

TABLE OF CONTENTS

IMPORTANT!  Keep these instructions for future reference.  If the unit changes owner-

ship, be sure this manual accompanies the equipment.

Service/Technical Assistance

If you experience any problems with the installation or opera-

tion of your unit, contact your local Roundup Authorized 

Service Agency.  They can be found in the service agency 

directory packaged with the equipment.

You may also contact the factory at 

1-877-392-7854 (toll 

free in the U.S. and Canada) 

or 

1-630-784-1000 

if you have 

trouble locating your local Authorized Service Aagency.

Owner Information .....................................................2

General .....................................................................2

Warranty Information ..............................................2

Service/Technical Assistance .................................2

Important Safety Information ....................................3

Dimensions ..............................................................5

Electrical Cord & Plug Configurations ..................5

Specifications  ............................................................5

Electrical Ratings ....................................................5

Model Designation ...................................................5

Installation ...................................................................6

Unpacking ................................................................6

Equipment Setup .....................................................6

Installing the Dual Water Pressure Regulator ......7

Checking and Cleaning the Water Strainer ..........7

Adjusting the Water Pressure Regulator ..............8

Installing the Optional Water Installation Kit ........9

Operation ...................................................................10

Operating Instructions ......................................... 10

Rotary Switch Settings ........................................ 10

Maintenance ..............................................................11

Daily ........................................................................11

Monthly ...................................................................11

Cleaning the Water Inlet Tube ............................. 12

Checking/Cleaning the Water Strainer Monthly ..... 12

Troubleshooting .......................................................13

Wiring Diagram .........................................................14

Replacement Parts ...................................................15

Technical Theory of Operation ...............................18

LIMITED WARRANTY ...............................Back Cover

Fill in the information below and have it handy when calling 

your authorized service agency for assistance.  The serial 

number is on the specification plate located on the rear of the 

unit.

Purchased From:

Date of Purchase:

Model No.:

Serial No.:

Mfg. No.:

Refer to the service agency directory and fill in the information 

below:

Authorized Service Agency

Name:

Phone No.:

Address:

Use only genuine Roundup replacement parts in this unit.  

Use of replacement parts other than those supplied by the 

manufacturer will void the warranty. Your Authorized Service 

Agency has been factory trained and has a complete supply 

of parts for this unit.

Содержание roundup MSS-200





















Отзывы: