MSS-200 MINI SPATULA STEAMER
9
P/N 1010903 Rev. A 09/05
INSTALLATION (continued)
Installing the Optional Water Installation
Kit
The optional Water Installation Kit (Figure 6) is used in
conjunction with the Dual Water Pressure Regulator for
the MSS-200 Spatula Steamer.
It allows you to easily connect your existing water
supply to the inlet side of the Dual Water Pressure
Regulator (Figure 7). It is equipped with quick discon-
nect attachments for easy installation and also has a
water shut-off valve for maintenance (Figure 7).
To install, follow these steps:
1. Make sure that the Water Shut-off Valve is
closed.
2. Attach the T-Fitting to your existing water supply.
WARNING
Make sure that the water hoses are not kinked or
bent. This could result in poor steaming perfor-
mance.
Figure 6. Water Installation Kit
Figure 7. Dual Water Regulator Kit (P/N 7000418) with optional Water Installation Kit (P/N 7000420)
To MSS-
200
From Cold
Water Supply
Main Shut
Off Valve
Dual Water
Regulator Kit
(P/N 7000418)
Optional Water
Installation Kit
(P/N 7000420)
NOTE: The T-Fitting is for 1/4” O.D. Tubing
3. Attach the Quick Disconnect fitting to the inlet
connection of the Dual Water Pressure Regulator.
