Antti-Teollisuus Oy
4
408102
02-2020
Vacboost WM09
Dryer Heater
PRESENTATION OF THE MACHINE
- The Vacuum Heater A1500 is intended for heating the drying air in a grain dryer. The blower unit, or units,
generate(s) an airflow through the heater and the dryer. The maximum temperature of the drying air can be as
high as 120°C.
- In the basic set-up, the grain dryer is placed between the heater and the blower, and an air duct is conducted
from the heater to the dryer's inlet air channel end. The air flows through the drying sections and via the suction
fan in the outlet air channel end into the air duct and further out of the building.
- The delivery of the dryer heater consists of several items: the heat exchanger, the optional outlet cone, the gas
burner and the accessories required for the assembl. In addition, the air pipe must be fixed/the heater must
be connected to the dryer. The electric installations of the grain dryer's control centre must be carried out by
an electrician. In addition is required a supply/reservoir of gas, and a pipeline from it to the burner, installed in
accordance with the regulations.
- The suction cone includes eight net elements, which may be removed for cleaning of the net. Loosen first the
M12x12 screw on the net element (1 screw/element), and after that, remove the element by sliding it in the
direction shown by the arrow.
Screw M8x12
Net element on the inlet air
channel
