1 Safety Instructions
B40IB006EN-D
7
1 Safety Instructions
•
Read the documentation before using
HTK 1200N.
•
Follow all hints and instructions contained in the
documentation to ensure the correct use and
safe functioning of HTK 1200N.
•
The documentation is a part of the product.
Keep this document for the complete working
life of the product and make sure it is easily
accessible to all people involved with the prod-
uct. If you receive any additions or revisions to
the documentation from Anton Paar GmbH,
these must be treated as part of the documenta-
tion.
1.1 General safety instructions
Liability
•
The documentation does not claim to address
all safety issues associated with the use of the
instrument and samples. It is your responsibility
to establish health and safety practices and
determine the applicability of regulatory limita-
tions.
•
Operate HTK 1200N with CCU 1000
Combined Control Unit from Anton Paar GmbH
only.
•
Anton Paar GmbH only warrants the proper
functioning of HTK 1200N if no adjustments
have been made to the mechanics, electronics,
and firmware.
•
Only use HTK 1200N for the purpose described
in the documentation. Anton Paar GmbH is not
liable for damages caused by incorrect use of
HTK 1200N.
Installation and Use
•
HTK 1200N is
not
an explosion-proof instru-
ment and therefore must not be operated in
areas with risk of explosion.
•
HTK 1200N must not be used with hazardous
(e.g. explosive or poisonous) gases.
•
The installation procedure should only be car-
ried out by authorized personnel who are famil-
iar with the installation instructions.
•
It is the responsibility of the customer to provide
all the set-up (tubings, valves,..) necessary for
proper work with HTK 1200N.
•
Do not use any accessories or wearing parts
other than those supplied or approved by Anton
Paar GmbH.
•
Make sure all operators are trained to use the
instrument safely and correctly before starting
any applicable operations.
•
In case of damage or malfunction, do not con-
tinue operating HTK 1200N. Do not operate the
instrument under conditions which could result
in damage to goods and/or injuries and loss of
life.
•
Check HTK 1200N, especially the sample
holder, for chemical resistance to the samples
and cleaning agents.
•
The results delivered by HTK 1200N not only
depend on the correct function of the instru-
ment, but also on various other factors. We
therefore recommend to have the results
checked (e.g. plausibility tested) by skilled per-
sonnel before consequential actions are taken
based on the results.
Maintenance and Service
•
Service and repair procedures may only be car-
ried out by authorized personnel or by Anton
Paar GmbH.
Disposal
•
Concerning the disposal of HTK 1200N,
observe the legal requirements in your country.
Returns
•
For repairs send the cleaned HTK 1200N
(instrument) to your Anton Paar representative.
Only return the instrument together with the
filled out RMA (Return Material Authorization)
and the form "Safety Declaration for Instrument
Repairs". Please download the Safety Declara-
tion form from our website www.anton-
paar.com.
•
Do not return instruments which are contami-
nated by radioactive materials, infectious agents
or other harmful substances that cause health
hazards.
Precautions for highly inflammable samples
and cleaning agents
•
Observe and adhere to your national safety reg-
ulations for handling the measured samples
Содержание HTK 1200N
Страница 2: ......
Страница 6: ...Contents 6 B40IB006EN D ...
Страница 56: ...Appendix G Declaration of Conformity 56 B40IB006EN D Appendix G Declaration of Conformity ...
