Z2Mute_FB
[digital]
The Mute_FB signal will be high when Zone 2 has mute activated and go low when the mute is deactivated.
Analog Outputs
TotalInputs
[analog]
The TotalInputs join reports the number of configured sources available. This can be used to configure a
dynamic list smart object. The maximum number of zones is 30.
Source_FB
[analog]
The Source FB join will contain the source number for the main zone. The values will match the source
programmed into the Anthem. This value will be updated to the current source for the main zone on startup
and when the source changes either from the module or directly on the receiver.
Volume_FB
[analog]
The Volume FB join will contain the volume for the main zone. The value reported is the Crestron 0 - 100%
(0 - 65535), so no scaling is required. This value will be updated to the current volume on startup and when
the main zone volume changes either from the module or directly on the receiver.
Z2Source_FB
[analog]
The Zone2 Source FB join will contain the source number for the zone 2. The values will match the source
programmed into the Anthem. This value will be updated to the current source for the zone 2 on startup and
when the source changes either from the module or directly on the receiver.
Z2Volume_FB
[analog]
The Zone2 Volume FB join will contain the volume for the main zone. The value reported is the Crestron 0 -
100% (0 - 65535), so no scaling is required. This value will be updated to the current volume on startup and
when the zone 2 volume changes either from the module or directly on the receiver.
SpeakerProfile_FB
[analog]
The Speaker Profile FB join will contain the current speaker profile selected. Valid values are between 1 and
4.
ListeningMode_FB
[analog]
The Listening Mode FB signal will contain the current listening mode. The currently available listening modes
are
Page 18
