Anthem MRC 40 Series, Инструкция по установке и эксплуатации

Страница: 20 / 22

AudioInFormat [analog]
The Audio In Format join contains the a value representing the audio format for the current input. Valid
values are
Audio In Value Audio Format
0 No Input
1 Analog
2 PCM
3 Dolby
4 DSD
5 DTS
6 Atmos
7 DTS-X
AudioInSample [analog]
The Audio In Sample join contains the sample rate in kHz for the current input.
AudioInBitDepth [analog]
The Audio In Bit Depth will be either 16-bit, 24-bit or 32-bit. Alternatively if the bit depth isn't recognised it
will return 0.
HorizResolution [analog]
The Horizontal Resolution join will return the horizontal resolution in pixels for the current input.
VertResolution [analog]
The Vertical Resolution join will return the vertical resolution in pixels for the current input.
String Outputs
Tx$ [string]
The Tx$ join is used to connect to the TCP/IP client, or the RS-232 connection in your project. Please refer
to the section labeled Module Configuration for details on how to configure the connection to the receiver.
VolumeDB$ [string]
The VolumeDB join contains the volume in dB for the main zone.
Page 20