Antec ALEXYS OR 100, Руководство пользователя, Страница: 24 / 46

24 User manual OR 100 /110, ed. 5
Outlet no. Part no. Connect to
1 250.0116 Mains
2 250.0143 Personal Computer
3 250.0141 DECADE II detector
4 250.0140 AS 100 autosampler
5 250.0140 LC 100 pump
6 250.0140 AC 100 acquisition controller
Use the manufacturer-supplied power cable(s) only to connect all
other devices with the OR 100. Manufacturer will not accept any lia-
bility for damage, direct or indirect, caused by connecting this instru-
ment to devices, which do not meet relevant safety standards.
Serial connections
Every individual ALEXYS system component is shipped with a specific
RS232C cable for computer control. These cables can be found in the cor-
responding ship kits. The part numbers are listed in the table below.
Table III. Serial cables of ALEXYS 100 LC-EC system components.
Part no. Description Qty
250.0122 DECADE II RS232 cable 1
181.0596 AS 100 serial cable, 9M-9F pins 1
182.0544 LC 100 serial cable, 9F-25F pins 1
183.0502 AC 100 serial cable, 9F-9F pins 1
•
Connect serial cables specified in Table IV in corresponding ports of
the AC 100. See Fig. 9 for port numbers.
Use always D-A-P (DECADE II, Autosampler, Pump) order of connect-
ing devices to be compatible with pre-configured device drivers in
ALEXYS data system!
Table IV. Connection scheme RS232 cables on AC 100.