Antec ALEXYS OR 100 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 46

Antec ALEXYS OR 100 Скачать руководство пользователя страница 15

CHAPTER 2 Installation guide

15

flow rates typi

cally in the range between 1 μL/min up to 10 mL/min. Use of

this product outside the scope of this manual may present a hazard.

Do NOT connect OR 100/110 to mains until the entire installation pro-
cedure is completed.

Installation - liquid connections

This section is NOT a complete installation description for a complete
ALEXYS LC-EC System. It describes the installation of the OR 100 / 110
and related liquid and electrical connections only. For a complete installa-
tion procedure of ALEXYS LC-EC system consult the user manual of all
system components (pump, autosampler etc.) and the installation manual
provided in the ALEXYS connection kit.

For installation of the LC connections on the OR 100 / 110 the appro-
priate LC connection kit is required containing a complete set of
tubing and fittings.

Unpacking of OR 100/110

Unpack the OR 100 /100 in the following way. Lift it from its box by both
hands as illustrated in Fig. 3 and put it on a suitable location meeting

«
...
13
14
15
16
17
...
»

Содержание ALEXYS OR 100















































Отзывы:

Нет отзывов