ENG
LISH
START 8 Series
| User manual
4
5
User manual
|
START 8 Series
Series
2
|
DESCRIPTION
1
3
4
2
5
6
7
FRONT PANEL
8
2.1
|
START 8R RECEIVER
1 POWER
Press this button on receiver front panel for 1” to turn ON/OFF the unit.
The device saves all the settings made in the receiver's internal memory.
Each time the power is turned on, the receiver will be tuned to the same
group and channel selected before the switch off.
2 CHANNEL SELECTION BUTTON
Press this button to scroll and select channels in ascending order from
1 to 8.
ATTENTION
: The transmitter and the receiver must be set on the same
channel of the same band.
The receiver channel can be changed at any time with the transmitter
on or off.
3 IR WINDOW
It allows the synchronization of the channel (frequency) with the
transmitter. After choosing the desired channel, press the ASC button,
place the handheld microphone or beltpack transmitter close to this
window and wait for the selected channel to stop flashing on receiver
display. After the synchronization, the receiver's display is lit steadily on
the selected channel (frequency)..
4 ASC
Press this button to achieve automatic channel (frequency)
synchronization via infrared.
5 DISPLAY
It shows the number of the activated channel.
6 AF AND RF LEVEL INDICATORS
These LEDs respectively indicate the level of the audio signal and the
level of the radio signal.
Audio signal - AF
Steady green light: audio signal present.
Radio - RF signal
Orange light fixed: RF communication present.
Light off: free channel, but no transmitter on.
7 VOLUME
Rotate this knob to adjust the desired output level.
8 ANTENNAS
Place the telescopic antennas in a vertical position for good signal
reception.
ATTENTION
: during use, the antennas housed on the front must be
extracted for their entire length.
1
|
INTRODUCTION
Thank you for choosing a
A.N.T - Advanced Native Technologies
- product!
In
START 8
wireless systems we have put our passion and our technological background
gained over the years, to offer products that meet your needs, maintaining the quality
over time.
The use of the UHF band has become increasingly complex for radio systems due to
the presence of multiple devices working on these frequencies. The
START 8
radio
systems operate in the VHF range and have 8 channels on each of three specific bands:
F1 174-184MHz / F2 190-200MHz / F3 206-216MHz.
The
START 8
system is equipped with a technology that introduces a pilot tone together
with the analogue audio signal, ensuring a significant reduction of problems related to
interfering interferences. This allows you to cancel the classic problems of unwanted
opening of the squelch by the disturbances, as it happens with the normal systems,
facilitating the use for anyone.
Both version receivers implement the Diversity technology, i.e. the receivers have two
separate A/B antennas, used to select the best radio signal at any time. The antennas
are fixed on receiver frontal panel but can be placed in horizontal position by means of a
joint at their base. Please, dedicate some minutes to read this instruction manual in order
to quickly achieve the best performances from this product.
For safety precautions, warranty and disposal, please refer to attached Section 2.
For further information about all
A.N.T
products catalog, please visit our website:
www.ant-intomusic.com
