Anritsu HR-1100, Инструкция по эксплуатации, Страница: 32 / 33

26
* About analog output
The indicated value is D/A-converted and outputted. The timing of an update is
about 200 mS, and the output resolution is in the order of 1 mV.
* When not used, turn the analog output off (see instruction manual.)
Specifications (alarm output) HR-13*0 and HR-13*1
Below lower limit
Within upper/lower
limits
Above upper limit
ALM1
Upper limit
Open Open Close
ALM2
Lower limit
Close Open Open
Cable ALMHA-1.5
* The alarm output uses a photo MOS relay.
ON resistance (internal protection resistance 400Ω, photo MOS relay ON resistance
50Ω) Drive voltage MAX.25V
Specifications (memory function) HR-15*0
Time interval
1second,5second,10second,30second,
1minute,5minutes,10minutes,30minutes,60miinutes
and manual memory
Memory capacity 19999 data
Specifications (power supply)
Model (HR-) 11*0 12*0 13*0 13*1 14*0 15*0
Batteries 4 x Alkaline AA battery (LR6)
Battery life (continuous
operation time)
About
900h
About
900h
About
600h
About
400h About
300h
About
550h
hAnalog output
(continuous output)
About
20h
AC adaptor (optional)
support
● ● ●