Anritsu HR-1100, Инструкция по эксплуатации, Страница: 18 / 33

12
(3) Releasing the calibration mode
To release the calibration mode, press the CAL SET key
twice.
5.8. Alarm Function [Applicable Model: HR-13*0]
The alarm function indicates data abnormalities when
measured data go out of the setup range (upper and
lower limits.) For every measurement, the alarm
function is turned on. When an abnormality is
detected, a mark to indicate the abnormality is shown
at the top of the screen.
Measured data status Mark indicating abnormality
Upper limit ≤ Measured data ALM ↑
Lower limit ≥ Measured data ALM ↓
Within upper/lower limits of
alarm
None
(1) Setting of upper/lower limits of alarm
(i) When the ALM SET key is pressed, the setting
screens are switched in order as follows. Display the
desired screen to make changes.