Anritsu HR-1100, Инструкция по эксплуатации, Страница: 2 / 33

To safely operate and service the thermometer and to prevent any product
damage and/or maintain the precise temperature measurement results, please
carefully follow the instructions below:

Do not use this product for any purpose other than taking temperature
measurements.

If any abnormalities are found, immediately stop using the product.

Do not disassemble or modify the product.

Do not use any power supply other than commercially available dry batteries
and/or a dedicated adaptor.

Insert the batteries in the correct manner (pole+ to pole+).

Remove the batteries when depleted or when the product is not expected to be
used for an extended period of time.

Do not mix old and new batteries or batteries of different makes or types.
● Do not throw into an open fire. Do not short circuit, disassemble, or heat.
● Do not recharge the batteries at any time.
● Use specified type batteries.
●
To prevent electric shock, do not touch the metal parts or terminals of the probe cable
or analog output cable during measurement.
●
To prevent electric shock, if the probe is still in contact with the voltage application part
even when the power is turned off, disconnect the probe before setting the analog
output cable or device.
※
When measuring under the influence of high voltage and high frequency, there is a risk
of electric shock and measurement failure, so please contact us.
Safety information
Caution
Warning