Anritsu HR-1100, Инструкция по эксплуатации, Страница: 17 / 33

11
5.7. Calibration Function [Applicable Model: HR-13*0]
The calibration function offsets-compensates the measured data.
(1) Calibration settings
(i) Make the probe contact the object of measurement, and when the
indication becomes stable, press the CAL SET key.
Note: When the CAL SET key is pressed, the calibrated temperature
first shown is a value that is calculated by adding the offset value that
was set last time to the current temperature.
In the above case, the last offset value is +0.4°C.
(ii) Use the ˄ and ˅ keys to set up a calibration value (sub-screens) to a
desired temperature.
Note: The setting range with the ˄ and ˅ keys are limited within
±10°C of measured values.
(iii) Press the ENTER key to complete the setting and automatically
return to the calibration mode.
Pressing the CAL SET key before pressing the ENTER key will
interrupt the setup process and the normal mode will resume.
(2) Calibration mode
During calibration mode, “CAL” is displayed on the
screen. In the main display, a value calculated by
adding the offset value to the current temperature is
displayed.
In the case of the image on the left, the current
temperature is 199.6°C, and the offset value is +0.4°C.