anko MT-600, Инструкция по эксплуатации

Страница: 18 / 36

Page 18 of 36
Note : If the Robot is asleep (no Blue Light in the button) press this button to
wake the Robot, and then press again to start normal cleaning mode.
• Press this button while the robot is cleaning to pause the cleaning session.
•
If you wish to cancel the cleaning altogether, you need to use the remote control
to send it back to the charging dock. Refer to the section “Remote Control” for
further instructions.
9 Remote Control
Power : Press to wake up or to enter sleep mode.
When using to wake up, wait 5 seconds before pressing any
other commands on the remote control.
Home : Press for the robot to stop cleaning and return to the
charging dock.
Start / Stop: When the robot has been woken up, wait 5
seconds then press start the Start / Stop button. When the
robot is in use, press to stop.
Note: The following (manual steering) will not function if
already cleaning. Stop cleaning first.
Forward - Press and the robot will move a short
distance in a forward direction with each press.
Backwards - Press and the robot will move a short
distance in a backwards direction with each press.
Left - Press and the robot will turn in a circle to the
left.
Right - Press and the robot will turn in a circle to the
right.
Turbo
: Press and the robot will enter turbo cleaning. The suction
power will increase until another button is pressed.