anko MT-600, Инструкция по эксплуатации

Страница: 16 / 36

Page 16 of 36
7.2 Charging the Robot – Charging Dock
• Setup the charging dock as described beforehand.
•
Place the robot on top of the charging dock and align centrally as shown.
If not already switched On, flip the switch on the side of the Robot to the
On (I) position.
While charging, or when the Robot needs charging, the On / Off button
on top of the Robot will illuminate a different colour as follows:
o Red light blinking indicates that the battery needs to be charged.
o Blue light blinking indicates the battery is charging.
o
When the Blue light is off, this means charging is completed.
Important : Before the first cleaning session, please charge continuously
for at least 8 hours.
• After the first cleaning session, allow the robot to charge for at least 16
hours before re-use.
•
For first time use, allow the Robot to clean until the battery power is used
up.