Page 20 of 44
6.5.1 Turbo Mode
Touch and keep touching the Speed Touch Button and the appliance will start in Turbo
mode.
This function starts the appliance at the highest speed.
Stop touching the Speed Touch Button, and the appliance will stop immediately.
NOTE
: This function will only operate for a maximum of 1 minute each time.
WARNING:
Ensure you have the correct ingredients and accessory fitted suitable for full
speed use before using this function; otherwise, you will damage the product.
6.6 Heating Power
This part of the Digital Display shows the Heating Power from level 0 to 10.
(10 is the highest setting which means it will heat quicker).
To set the desired Heating Power, touch the Heat Function Touch Button to enter the
Heating Power Setting, and the Heating Power Digits will blink.
NOTE
: You will have approximately 5 seconds to set the Heating Power required before the
display returns to normal.
Note
: Some of the Pre-set programs lock the Heating Power so you cannot adjust during
operation.
Within 5 seconds, rotate the knob to adjust the Heating Power required.
Note:
as you adjust the Heating Power, the Temperature Digit will automatically show 100°C
by default.
You need to select a setting from 1 to 10 for this function to work. If you leave the setting as
0, it will not work.
6.7 Temperature
This part of the Digital Display shows the Temperature in Degrees Celsius (°C)
To set the desired temperature, touch the Temperature Setup Touch Button to enter the
Temperature Setting, and the Temperature Digits will blink.
NOTE
: You will have approximately 5 seconds to set the Temperature required before the
display returns to normal.
Note
: Some of the Pre-set programs lock the Temperature so you cannot adjust during
operation.
Within 5 seconds, rotate the knob to adjust the temperature required.
00:00:00 00 0 0
00:00:00 00 0 0
