Page 19 of 44
To set the desired operation time, touch the Timer Touch Button to enter the Minute
Setting and the Minute Digits will blink.
Rotate the knob to adjust the minutes required.
Touch the Timer Touch Button again to enter the Seconds Setting and the Seconds Digits
will blink.
Rotate the knob to adjust the seconds required.
Touch the Timer Touch Button again to enter the Hours Setting and the Hour Digits will blink.
Rotate the knob to adjust the Hours required from 1 to 12 Hours.
NOTE
: After setting the timer, wait for 5 seconds for the timer to stop blinking and then start
the appliance working.
If you start the appliance without setting the timer, the timer will start to count up. Touch the
Timer Touch Button whilst working and the timer will start to count down and the appliance
will turn off when the auto off time has been reached.
For example: You have started the appliance and the timer has counted up to 15 seconds.
At the same time, it reached 15 seconds, touch the Timer Touch Button and the timer will
then start to count down from 15 seconds and when the timer reaches 0, the appliance will
turn off and display “End” and will beep.
To clear the word “End”, press the Start / Pause button.
6.5 Speed
This part of the Digital Display shows the Speed
To set the desired speed, touch the Speed Touch Button to enter the Speed Setting,
and the Speed Digit will blink.
NOTE
: You will have approximately 5 seconds to set the speed required before the display
returns to normal.
Note
: Some of the Pre-set programs lock the speed so you cannot adjust during operation.
Within 5 seconds, rotate the knob to adjust the Speed required.
Speed ranges from level: 1 - 10. (10 is the Highest Speed)
Note
: If in blending & heating mode, and if the temperature setting, or the actual temperature
is over 90°C, the maximum speed settings that can be selected are speeds 1 to 4.
If the appliance is working, or set at higher speed (5 to 10), and the temperature reaches or
is set to 91°C or above, the speed will automatically drop to speed setting 4.
Important:
If using the appliance at speed settings 8, 9 or 10, do not run for more than 2
minutes at a time without a 5-minute cool down period in-between uses.
00:00:00 00 0 0
