Copyright © 2015 anioGPS. Todos los derechos reservados
32
File Name: AnioMOTO A201
Creator: Stiven Arcila
Created on: 14-‐01-‐2015
Updated on:
9.24
Set Analog Voltage
If your analog sensor max voltage is not 6V, then specify correct voltage to the
device by performing the following steps.
Command Format:
<Password>
AV
<AD port><Min voltage of sensor>,<Max voltage of sensor>,24
Explanation:
<Puerto AD> =
1 means Analog Input 1
<Min voltage of sensor> =
input your sensor min voltage here
<Max voltage of sensor>=
input your sensor max voltage here
Note:
This value cannot exceed the max voltage the device supports.
9.25
Movement Detection Alarm
AnioMOTO A201 has an built-‐in motion sensor for motion detection. The device will
send an SMS to the preset SOS number when the device detects movements with a
preset sensitivity.
Command Format:
<Password>
SKA
<Index>
Explanation:
<Index>=
1 enables this function
= 0 disables this function
Example:
000000
SKA
1
This means that the movement detector alarm is enabled.
9.25.1
Define motion sensor sensitivity
Command Format:
<Password>
MSS
<Value>
Explanation:
<Valor>=
1 ~ 15.
Note:
The higher value, the lower sensitivity
