Animas IR 1250, Руководство пользователя

Страница: 64 / 114

Page 64
12
5. Within 5 seconds, the pump will beep twice to “ask” you to confirm that you wish to activate
delivery and the Confirm screen is displayed.
6. Within 5 seconds, press the button again to activate delivery. The pump will beep twice to
confirm your delivery command. The Delivering Bolus screen is displayed and your pump will
beep once to signal the start of delivery and once to signal end of delivery (if you turned on
Normal Bolus Sounds in Setup).
7. The pump will again sound the number of beeps to indicate the step size you’ve chosen and to
signal the Audio Bolus sequence is finished.
If you wish to cancel the Audio Bolus, press any button. The
bolus will be canceled (as in the case of a Normal bolus).
If you cancel a bolus delivery after you’ve activated it, the screen at
right will be displayed. See Chapter 14, Safety System and Alarms.
If during a bolus delivery, your low cartridge level is reached, the
pump will not display the warning until after the bolus is
completed. So you could possibly have less insulin available than your low cartridge
setting.
Example: Your low cartridge warning is set to 10 (units). You have 20 units of insulin
remaining and you deliver a 15 unit bolus. The Low cartridge warning appears after bolus is
completed and you have only 5 units left – not 10 units. The Wake up screen will show the
remaining insulin amount.
The maximum number of Audio Bolus button presses is 20. Therefore, if you’ve set the step
size to 0.1 U, the maximum audio bolus amount is 2 U. If you’ve set the step size at 0.5 U,
the maximum audio bolus amount is 10 U and if your step size is 1.0 U, the maximum audio
bolus amount is 20 units. With a 5.0 U step size, the maximum cannot be greater than 35
units, which is the maximum amount for any type of bolus.