Animas IR 1250, Руководство пользователя

Страница: 34 / 114

Page 34
5
Once you’ve inserted the infusion set base into your body, you are ready to connect your primed
tubing. Refer to the
Instructions for Use included with your infusion set for proper insertion
guidelines. See next section, Selecting the Infusion Site and Inserting the Infusion Set.
12. From the PrimeSmart menu, Fill Cannula is highlighted. Press the OK button. The Fill
Cannula screen is displayed.
13. Use the Up/Down arrows to enter the amount of insulin needed to bolus to fill the cannula.
Refer to the
Instructions for Use included with your infusion set for details on how much insulin
is required to fill the cannula.
Note: The maximum Fill Cannula amount is 1U at a time.
If the pump is suspended, the screen will alert you with the PrimeSmart
Pump Suspended screen. You must resume delivery of your pump in
order to complete the Priming function.
Selecting the Infusion Site and Inserting the Infusion Set
Your healthcare team will review appropriate site selections and
techniques for insertion based on your body type. Refer to the
Instructions For Use included with your infusion set for proper insertion guidelines.
Do NOT attempt to insert the infusion set into your body until you have been trained by your
diabetes educator. Incorrect use of your pump can lead to death or serious injury.
Changing the Cartridge and Infusion Set
Cartridges and infusion sets require replacement and are not to be reused. Infusion sets should be
replaced approximately every 2 – 3 days or as directed by your healthcare team. Refer to the
insulin labeling and follow the direction of your healthcare team for frequency of replacing the
cartridge.
Occasionally check the infusion set tubing for any damage or kinking. Damaged or kinked
tubing may restrict or stop insulin delivery and result in under infusion.