IT
GB
DE
FR
ES
C13161
861.
fm
- 9 -
English
The lighting and turning off procedure is as de-
scribed below for both burners.
Lighting
1 - Turn on the gas supply tap.
2 - Press the knob
(A)
and turn it anti-clockwise
(pos.
1
) while at the same time pressing the pi-
ezoelectric ignition knob
(B)
repeatedly to light
the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple.
4 - Turn the knob anti-clockwise (pos.
2
) to the
temperature required.
Turning off
1 - Turn the knob clockwise (pos.
3
) to turn the
burner off.
The pilot light will remain on to allow the burner
to be re-lit.
2 - Press the knob and turn it clockwise (pos.
4
) to
turn off the pilot light.
3 - Turn off the gas supply tap.
To carry out this operation, proceed as follows.
Important
Before proceeding, allow the appliance to
cool for 10-15 min., so that the oil reaches a
temperature between 50-120°C.
1 - Open the hatch
(A)
.
2 - .Fit the extension
(B)
onto the tap
(C)
.
3 - .Place the container
(D)
and the filter
(E)
, both
available as optionals, underneath the exten-
sion
(B)
.
4 - Turn on the tap
(C)
to empty the well.
5 - Turn off the tap
(C)
on completion of the opera-
tion.
Caution - warning
Do not dump oil in the environment; dispose
of it in accordance with the laws in force in
the country of use.
SWITCHING THE BURNER ON AND OFF
FILTERING OIL
B
IDM-39618900600.tif
1
A
2
3
4
A
C
B
E
C
D
IDM-39603310800.tif
Содержание 0G1FR7G
Страница 2: ......