Anest Iwata MSU B193, Руководство по эксплуатации и обслуживанию, Страница: 28 / 48

IMPORTANT:
Before positioning the delivery pipe assembly (1), make sure the ferrules (2c) and (2d) are fastened
to the pipe; the ferrules must be free to turn around the pipe but must not come off.
- Position the delivery pipe assembly (1) as shown
in the picture and lubricate the following compo-
nents with oil: ferrules (2c and 2d); nut threads
(2a and 2b); connector threads (2e and 2f)
- Position the pipes so that their ends are aligned
with the connectors (2e) and (2f).
- Tighten nuts (2a and 2b) manually. If the ends of
the pipes are not aligned with the connectors (2e
and 2f), this operation will be impossible to carry
out. In order to achieve the alignment, move the
paint filter as shown in Figure A until you achieve
a perfect alignment; now the manual assembly of
the nuts will be extremely easy to carry out.
- The nuts (2a and 2b) must be tightened symme-
trically and progressively.
- Tighten the screws (I).
- Tighten the nuts (2a) and (2b) symmetrically and
progressively. The torque must be 130 Nm.
28
FIGURE B
FIGURE C
FIGURE D