Anest Iwata MSU-323 C, Инструкция по эксплуатации и обслуживанию, Страница: 9 / 32

9
3.3 PLATE DATA
The manufacturer’s identification plate is applied on the Multi Spray Unit (see picture below).
It must not be removed at all, even if the equipment is resold. For any communication with the
manufacturer always mention the serial number written on the plate itself.
3.4 COMPLIANCE TO THE STANDARDS
All the units are conceived in compliance with the applicable Essential Safety Requirements of the
Machinery Directive 2006/42/EC.
The units are also designed and manufactured in compliance with the Essential Safety Requirements
(ESR) of Annex II of Directive "
ATEX" 2014/34/EU
and they comply with the following classifica-
tion:
• Equipment group : II
• Category: Gas 2G (Suitable for use in zones 1 and 2)
• Max. surface temperature: temperature class T6
• X marking : Any static electricity discharge from the pump is to be diverted to the ground through
the grounding wire which is included in this product.
MAX AIR W. P.R. RATIO SERIAL NO.
0.68 MPa / 6.8 bar / 98 psi 17:1
MANUFACTURED
MSU 323 C - MULTI SPRAY UNIT
ANEST IWATA Strategic Center S.r.l.
C.so Vigevano,46
10155 Torino Italy
Serial number
Model
Max. working air pressure