Anest Iwata MSU-323 C, Инструкция по эксплуатации и обслуживанию, Страница: 11 / 32

11
SAFETY PICTOGRAMS
Some pictograms can be found on the pump with the safety warnings to follow by anyone who is
going to use it.
WARNING
THE MANUFACTURING COMPANY IS NOT TO BE HELD RESPONSIBLE FOR DAMAGE OR
ACCIDENTS TO PEOPLE OR THINGS COMING FROM THE NON-COMPLIANCE WITH THE
PRESCRIBED RULES.THE RESPONSIBILITY RESTS ENTIRELY WITH THE OPERATOR HIM
SELF.
3.6 WORKABLE PRODUCTS
All Multi Spray Units ANEST IWATA are conceived to paint ferrous material in general, wood and
plastic.
Model MSU 323 C is designed for paints with a maximum viscosity of 85 sec/Ford #4
(100 sec/NK-2). We don't recommend the use of this model with water-based paints.
Model MSU 323 CTX is designed for paints of medium viscosity.
Models MSU 423 TX and MSU 433 TX are intended for high viscosity and water-based paints
also.
To use the equipment with special products ask for the approval of the manufacturer.
Moreover, the technical features of the unit must be adapted for processing such products.
ANEST IWATA is not liable for any accident due to UNAUTHORISED and non qualified personnel
using the pump or personnel using it for purposes that are different from the above-mentioned ones.
WARNING
DO NOT USE:
- ANY HALOGENATED HYDROCARBON SOLVENTS, SUCH AS TRICHLOROETHANE, METHYLENE
CHLORIDE OR SOMETHING LIKE THAT;
- ANY TOXIC PRODUCTS SUCH AS PETROL, KEROSENE OR COMBUSTIBLE GASES;
- ANY HERBICIDE OR PESTICIDE
- ANY RADIOACTIVE FLUID