Anest Iwata MSU-323 C, Инструкция по эксплуатации и обслуживанию, Страница: 15 / 32

15
6. USE
6.1 USE
This section describes the Multi Spray Unit use in compliance with the safety standards in force.
Read this section carefully.
LIMITS AND CONDITIONS OF USE
Any modification to the constructive shape or to the assembling position is allowed only after
asking for ANEST IWATA technical service authorization.
If there is no authorization the ATEX approval in no longer valid.
ENVIRONMENTAL CONDITIONS
Room temperature: min. + 5°C; max. +40°C
The plate data of the maximum superficial temperatures refer to measures taken in normal environ-
mental conditions and to a normal installation.
Any minimum variation of these conditions can greatly affect the heat development.
6.2 SAFETY RULES DURING USE
TO USE
the Multi Spray Unit
COMPLY WITH
the safety precautions and rules described below.
The manufacturing company declines all responsibility if the operator does not comply with
them. It is not to be held responsible for any carelessness during the pump use, either.
-
If the system is used improperly, it could be broken by causing serious damage.
- Use the Multi Spray Unit for professional purposes only.
- Do not change the system; use only Anest Iwata original spare parts.
- Check the system daily: repair or replace immediately all worn or damaged parts.
- Never exceed the maximum working pressure: 6.8 bar.
- IT IS FORBIDDEN to use the equipment for purposes that are different from the ones it is
destined to which are described in the use and maintenance manual. If in doubt, apply to
your ANEST IWATA reseller.
- Use paints and solvents compatible with the system parts they come in touch with.
- Refer to the paint and solvent features mentioned by the manufacturer.
- Wear the protective clothes described in section 6.3.
- Comply with all the local standards on electric safety and fire risks.
6.3 CLOTHES
Wear some protective gloves and goggles, an oxygen mask and some ear protections during
working. In any case, follow the references of the current regulations.