Anest Iwata ISP-1000, Инструкция по эксплуатации

Страница: 25 / 29

-23-
5.2 Maintenance
Maintenance interval is when arrives at earlier than either 1 year or 8,000 hr.
When maintenance interval has elapsed, be sure to contact our distributor who sold
it to you. This vacuum pump requires maintenance conducted only by our authorized
specialist. Never try to disassemble, reassemble or alter on user’s side. We are not
responsible for any accidents caused by disassembly, reassembly or alteration which
was done by the user or non-specialist. As the table below shows average conditions,
shorten the maintenance interval and carry out maintenance if ambient and
operating conditions are unfavorable or severe. The table below is based on ambient
temperature 10
～
40
℃
and yearly average ambient temperature 25
℃
.
Maintenance interval differs from guarantee period.
The following parts are consumable and need to be replaced periodically.
Whenever something goes wrong with them, replace them immediately.
Maintenance interval
W h e r e t o i n s p e c t
Yearly or
every 8,000 hours
Biennially or
every 16,000 hours
Every 400 times
vapor pumping
Bearing kit Grease /
△ ○ △
Tip seal set
○ ○ △
Seal set
○ ○ △
O-ring set
○ ○ △
Exhaust valve set
○ ○ △
Air-flush kit
○ ○ ○
Pin crank kit
△ △ △
Stopper set
△ ○ △
Vacuum pump itself
Inside cleaning /
△
Inside cleaning /
△
Inside cleaning /
△
○・・・
Replace
△・・・
Replace if something goes wrong.
Note 1
：
Maintenance interval should be shorter than either the period or operating hours.
Note 2
：
When you want further maintenance and inspection after either the 6
th
year or 48,000
operating hours, please contact our distributor who sold it to you.
Important
Causes of failure
Shorten maintenance interval if conditions of installation or operation are unfavorable.
In particular, ambient temperature has a great influence on failure. Maintenance interval is based on an ambient
temperature 10
～
40
℃
and a yearly average ambient temperature 25
℃
.
Shorten the maintenance interval if temperature exceeds the foregoing. If not, it can cause failure.
Maintenance interval is not a guarantee period.
Exceeding maintenance interval
Operation exceeding maintenance interval increases risk of failure and accidents.
When maintenance interval has elapsed, be sure to contact either the distributor who sold it to you or us.