Anest Iwata ISP-1000, Инструкция по эксплуатации

Страница: 16 / 29

-14-
Terminal plate
Terminal Block
Electric Source
Terminal M4 Nut
Ground Terminal
M5 Bolt
200V Connection
(When delivered to you)
400V Connection
Chart
－
1
Voltage
V
Frequency
Hz
Recommended protective
device (or breaker)
capacity A
200 50 6.3
200 60 6.7
208 60 6.7
230 60 6.6
380 50 3.6
400 50 3.9
415 50 4.1
460 60 3.8
How to wire
①
Remove 4pcs. of M5 bolt at motor terminal box and remove protection cover.
※
Be careful not to lose removed M5 bolts and washer.
②
Wiring diagram is shown inside protection cover.
You can change to a 200V or 400V connection by changing terminal plate (3pcs.).
※ ※ ※ ※
It is wired to 200V when delivered to you.
③
If you want to change to a 400V connection, remove M4 nut of electric source
terminal and change terminal plate as illustrated below.
④
Insert electric source cord through cable gland on the bottom side of terminal box.
⑤
Connect each phase L1-L2-L3 to each electric source terminal respectively in
accordance with the below wiring diagram.