Marked parts are consumable parts
• Use optional collar [13] when you use very high
viscosity material, or flow resistance in nozzle
inner dia, or material does not emit smoothly.
• As nozzle is not included, refer to Operating
procedure on page 3 and prepare it separately
on your side.
DESCRIPTION
REF.PART
NOZZLE HOLDER
1
NOZZLE GLAND SET
2
GUN BODY
3
NEEDLE SEAT
4
FLUID NEEDLE SET
5
NEEDLE BAR SET
5-1
CONICAL SPRING HOLDER
5-2
CONICAL SPRING WASHER
5-3
PACKING HOLDER
5-4
SUB PACKING
5-5
NEEDLE PACKING
5-6
NEEDLE PACKING SEAT
5-7
NEEDLE SPRING HOLDER
5-8
SCREW
5-9
NEEDLE SPRING
6
NEEDLE SPRING SEAT
7
TRIGGER STUD
8
HEX. CAP NUT
9
TRIGGER SET
10
UNIVERSAL JOINT (NPS 3/8”)
11-1
UNIVERSAL JOINT (G 1/4”)
11-2
UNIVERSAL JOINT (G 3/8”)
11-3
NAME PLATE
12
COLLAR
13
•
When you open the package, be sure to check that all goods are included and are in good condition.
•
If there is any damage or missing components, do not use the product to avoid danger and immediately contact the distrib
utor who sold it to you.
•
Always keep caution plates (warning display) in good condition and clean.
If they are damaged or missing, replace with new ones.
OPERATING PROCEDURE
CONNECT HIGH PRESSURE HOSE
WARNING
Securely connect high pressure hose without leak or loosening.
If hose is disconnected during operation, hazardous hose movement and material ejection will cause severe bodily
injury.
When material leaks, never try to stop it by hand. In that case, stop pump immediately and reduce material pres
sure down to 0 pressure.
Material or solvent can enter human body directly through eye, mouth or skin. It is very dangerous. If you feel any
abnormality or receive any injury, consult a medical doctor immediately.
CAUTION
Before using a new flow gun, clean inside of the new flow gun. If not, rust preventive inside flow gun can cause
materialing failure.
FIT OR REMOVE NOZZLE
Fit nozzle to flow gun
WARNING
Be sure to stop pump, reduce fluid pressure down to [0 MPa] and securely apply safety lock of flow gun before you
fit or remove nozzle tip.
Material or solvent can enter human body directly through eye, mouth or skin. It is very dangerous. If you feel any
abnormality or receive any injury, consult a medical doctor immediately.
IMPORTANT
We are not responsible for any death, injury, failure or damage caused by nozzle.
1. Never alter this flow gun.
If done, it can cause insufficient performance and failure.
2. Enter working areas of other equipment (robots, reciprocators, etc.) after machines are turned off.
If not, contact with them can cause injury.
3. Never flow foods or chemicals through this gun.
If done, it can cause accident by corrosion of fluid passages or adversely affect health by mixed foreign matter.
4. Securely connect fluid hose.
If hose is disconnected during operation, hazardous hose movement and paint ejection will cause severe bodily injury.
5. If something goes wrong, immediately stop operation and find the cause. Do not use again until you have solved the pro
blem.
3
6
CHECKING THE PRODUCT
OTHER PRECAUTIONS
SPARE PARTS LIST
