NT_ANEP_P3GU_07-12-2018
NT_ANEP_P4GU_VoLTE_EN_12-05-2022
38 / 48
SERVICES
Incoming calls
Allows you to answer incoming calls.
When receiving a phone call, the line status LED (white) will briefly flash 4times
every 4 seconds as described in chapter "Signals" (see page 39) and the
telephone will ring.Décrochez le combiné pour répondre à l'appel.
The line status LED (white) and the device status LED
(red) will light up, and communication with the caller will be established.
Outgoing calls
Allows you to dial a number on the 2G / 3G / 4G network.
The fallback feature is a feature that allows phones covered by the
4G network to fall back on the 2G/3G network to be able to make a call.
If the gateway is connected to a PABX (autocom), please refer to the switchboard
manual.
If the gateway is connected to a telephone :
• Pick up the handset
The line status LED (white) lights up and the dial tone is heard.
• Dial the phone number to call.
When the called party answers, the device status LED (red) lights up.
Nota : once you have dialed the number, you can either
press # to send the number immediately,
or you can wait for the call to be automatically transferred once
that the call will be automatically transferred once the time of
dialing between digits will have elapsed (default 5 seconds)
Nota : if you receive the dissuasion tone when picking up the handset
the handset, check if the signal is present and make sure that the
SIM card is working properly.
