Template version:1
5/17
SETUP AND OPERATING PROCEDURES
1. DOWNLOAD THE FREE APP
Prior to first use, download and install the Andon App from the App Store(iOS device) or
Google Play(Android device). Use keyword search terms ”mHealth”.
2. BATTERY LOADING
a. Open battery cover at the back of the monitor.
b. Load two
“AAA” size batteries. Please pay attention to polarity.
c. Close the battery cover.
When LCD shows battery symbol
, replace all batteries with new ones.
Rechargeable batteries are not suitable for this monitor.
Remove the batteries if the monitor will not be used for a month or more to avoid relevant
damage of battery leakage.
Avoid the battery fluid to get in your eyes. If it should get in your eyes, immediately
rinse with plenty of clean water and contact a physician.
The monitor, the batteries and the cuff, must be disposed of according to local
regulations at the end of their usage.
3. CLOCK AND DATE ADJUSTMENT
a. At first the Blood Pressure Monitor is totally off, once you insert the battery, the
Blood Pressure Monitor will enter Clock and Date Adjustment Mode.
b. If the time of the device is already set and need to be changed, adjustment can be
reached by pressing the “START/STOP” button for 5 seconds in Standby Mode.
c. In Clock and Date Adjustment Mode , the time format will blink at first , see
picture3-1
.If the monitor has no result stored in the current user ,the default time
format is 24h(Europe Version) and the default clock and date is 2016-1-1 1:00,
else the default time format, clock and date is same as the most recent result
’s.
d.
Press the button “START/STOP” repeatedly, the year (first usage: default is 2016,
range is 2016~2099), month, day, hour and minute will blink in turn, see
picture 3-
2& 3-3 & 3-4 & 3-5 & 3-6
.
While the number is blinking, press the button “MEM” to
increase the number, keep on pressing the button "MEM", the number will
increase faster.
