Template version:1
9/17
Picture 8 Picture 8-1 Picture 8-2
b.
Alternatively, press “MEM” button in Clock Mode to display the stored results. The
current memory bank will blink and the amount of results in this bank will be
displayed.
See picture 8-1.
Press “START” button to change over to other bank.
See
picture 8-2.
Confirm your selection by pressing “MEM” button. After selecting the
memory bank, the LCD will display the average value of all results in this bank,
See
picture 8-3
.
If no result stored, LCD will show dashes as
picture 8-4
.
Picture 8-3 Picture 8-4
c.
When the average is displayed, press
the “MEM” button, the most recent result will
be displayed.
See picture 8-5
.
Followed by, the blood pressure and pulse rate will be
shown separately. Irregular heartbeat symbol (if any) will blink.
Press “MEM” button
again to review the next result.
See picture 8-6.
In this way, repeatedly pressing the
“MEM” button displays the respective results measured previously.
Picture 8-5 Picture 8-6
e.
When displaying the stored results, the monitor will turn off automatically after 1
minute of no operation. You can also press the button “START” to turn off the monitor
manually.
9. SYNCHRONIZING STORED RESULTS
a. In Clock Mode
, press “MEM” button, the monitor will wait Bluetooth connect and
Bluetooth symbol flashing after confirming the group.
See picture 8-3
.
Bluetooth
symbol will stop flashing when Bluetooth is connected.
See picture 8-5.
b. When Bluetooth is disconnected, the monitor will turn off automatically after 1 minute
of no operation. You can also press the “START/STOP” button to turn off the monitor
manually.
10. DELETING MEASUREMENTS FROM THE MEMORY
When any average value is displaying, keeping on pressing button
“MEM” for three seconds, all results will be deleted after three “beep”.
