Anderson IFX720, Руководство оператора

Страница: 46 / 133

46 Operator's Guide – Round Bale Wrapper IFX720 Anderson Group
Troubleshooting
Table 17 — Troubleshooting the Remote Steering
Problem Possible cause Solution
The remote control is not
working. The AA batteries in the
remote are dead. Replace the batteries in the remote control. When you
press a button, the green LED will flash to indicate that
the remote control is transmitting a signal.
The remote is transmitting
(the LED is blinking) but the
machine is not responding. The remote is out of
range. Move closer to the wrapper.
The receiver is not
turned on Check that the Address Learn LED on the receiver
flashes and be sure that it is waiting for a signal (see
for the description of the LED).
The remote is no longer connected to the receiver.
The remote is no longer
connected to the
receiver. Connect the remote to the receiver by following the
instructions on page .
There is a problem with
the remote (turn off
engine button). Verify the stop engine button on the remote and retry.
The battery on the
wrapper is not charged
enough. Charge or replace the battery so that it provides at least
12.5 V to the receiver.
Some functions only work
once in a while. The electrical wires for
the function are loose or
not connected properly. Check the electrical connections on the receiver for
each function that is not working properly.
The remote control is not
starting the engine. The safety is activated
on the remote. Press the stop button on the remote and then press the
start button.