Anderson IFX720, Руководство оператора

Страница: 15 / 133

15 Operator's Guide – Round Bale Wrapper IFX720 Anderson Group
Moving the wrapper safely
Regardless of how the wrapper is
moved, nobody should be on the
machine.
Ensure that no people or animals are
within 5 metres (15 feet) of the
wrapper before it is moved.
Before moving the machine, lift the
front
of the wrapper with the
pivoting axle.
Locking the steering during transport
Before towing the wrapper, straighten its steering. Then
keep it from moving by inserting and locking the pin in
place (following figure).
Figure 7 — Locking the Steering Before Towing
Moving the wrapper short distances
Your wrapper can travel short distances (several hundred
metres) on its own.
To move the wrapper using its own traction system:
1. Close the guard (Figure 1) and pull the
emergency stop button (Figure 1).Figure 1Figure
2 The engine will not start if the guard is open or
the emergency button is pushed in.
2. Start the engine by pressing the start button.
3. Use the engine speed control lever to operate the
engine at full speed (see the following figure).
Figure 8 — Engine Speed Control Lever
4. Move the selector valve lever to the moving
position (Figure 2).
5. Use the hydraulic controls to move the wrapper
with the front traction (to move forward or
backward) and direction levers (to turn) ( Figure
2).
Moving the wrapper medium distances
You can hitch your wrapper to a tractor or truck to move it
less than 50 km.
Do not tow the wrapper behind a
tractor or truck for more than 50 km.
This will result in premature wear on
parts such as bearings and tires. To
transport it over longer distances,
put the wrapper on a trailer.
To move the wrapper with a tractor or truck:
1. Ensure that the ball valve on the front tailgate is
open.
2. Lift the wrapper by operating the pivoting axle
lever ( Figure 2 ) and hitch the tongue to the
tractor or truck (Figure 9).