Anderson IFX720, Руководство оператора

Страница: 12 / 133

12 Operator's Guide – Round Bale Wrapper IFX720 Anderson Group
NOTE: See chapter 5 (Common adjustments) for
a complete description of the required
maintenance and adjustments.
While operating the wrapper:
l
Keep your hands and feet away from the hoop,
pusher, chains, gears and other moving parts.
l
Wear protective clothing. Avoid scarves and loose
clothing (pants, shirts or coats) that can easily get
stuck in moving parts.
l
Wear suitable hearing protection. This will reduce
the risk of partial or total hearing loss from
continued exposure to noise from the wrapper.
l
Use a mask approved for working in dusty
conditions.
l
If you are working in the evening or at night,
ensure that the lighting is sufficient to operate in
complete safety.
l
Keep a working fire extinguisher handy.
l
Always leave protective screens and other safety
devices in place. If these parts are removed or
damaged, do not use your wrapper until they have
been fixed or replaced.
Before repairing or replacing anything on your wrapper:
l
Turn off the engine.
l
Remove the key from the ignition to ensure that
the engine cannot start accidentally while you are
working.
l
Store the key to the engine in the plastic black box
(manual box) on the side of the wrapper and lock
it with a padlock.
l
Chock the wheels if you need to work under the
machine.
Handling fuel
Because gasoline is highly flammable, it must be stored in
an approved container and handled carefully when you are
filling the tank. Once the tank is full, put the cap back on
and tighten it firmly. Then wipe up any gas that may have
been spilled. Never refuel when the engine is hot or
running. Always have a working fire extinguisher near the
wrapping area.
Hydraulic oil handling
Hydraulic fluid is a flammable substance. Keep it in an
approved container and always be careful when filling the
tank. Once the tank is full, put the cap back on and tighten
it firmly. Then wipe up any oil that may have been spilled.
Never refuel when the engine is hot or running. Always
have a working fire extinguisher near the wrapping area.
Should any hydraulic oil penetrate
your skin, quickly consult a doctor
who is familiar with this type of
injury. Left untreated, such an injury
can result in serious complications or
even require amputation.
Storing the wrapper
At the end of each working day, close the stop fuel valve
located under the choke on the right-hand side of the
engine ( Figure 4 ). This is particularly important before a
long period of storage.
Figure 4 — Closing the Fuel Valve
Moving the wrapper
When driving on the road, comply with all local
identification and lighting regulations. We recommend
you always attach the safety chains to the point of
attachment between the machine and your vehicle and
lock the connecting pin with a locking pin.
2.1 Safety Labels
The following table shows the labels found on the wrapper
and explains their meaning.