User's manual
Guangzhou Andea Electronics Technology Co., Ltd.
14/18
http://www.gzandea.com
5.1.4.
Trigger options
Close RF when free: In the host control mode, the machine will automatically
turn off the radio frequency when it does not receive the command of card
reading or opening the RF
Read buzzer: When the buzzer on the board is on, tick the Read Buzzing to turn
on the read buzzer. At this time, the buzzer will buzz when reading the tag.
5.1.5.
Hardware switch
Open buzzer on-board: Whether to turn on the buzzer on the board.
Close anti-collision function: turn off the anti-collision function.
Send antenna ID: Whether to upload the antenna interface number when
User's manual
Guangzhou Andea Electronics Technology Co., Ltd.
11/18
http://www.gzandea.com
Working mode of the system can be divided into host mode and scan mode:
Host mode: Controlled by the host software.
Scan mode: take the initiative to scan and send the scanned data to the host.
Among them, when choosing the working mode as the scan mode, configure the
parameters of the scan mode:
Data block start address
Set the start address of the data block to be
scanned.
Number of blocks scanned
Set the number of blocks to be scanned
Scan the serial number of the tag
Set whether to scan the serial number of the
tag.
Scan data block
Set whether to scan the tag's data block
Scan
results
output
format
Output in original
value
The hexadecimal characters scanned are
output in hexadecimal format
Output in ASCII
code after being
converted into
hexadecimal
character
The hexadecimal characters scanned are
output in ASCII character string format
Separator
Separator type
1. Use the system separator
2. Use user-defined separators
System's separator
Carriage return& line feed 0x0D + 0x0A,
line feed 0x0A, carriage return 0x0D, TAB
0x07, semicolon 0x3B, comma 0x2C, space
0x20.
Customized
separator
Set a custom separator value, which falls
within 0x00-0xFF
Ending
character
Ending character
type
1. Use the System's ending character
2. Use the Customized character
System's ending
character
Carriage return& line feed 0x0D + 0x0A,
line feed 0x0A, carriage return 0x0D, TAB
0x07, semicolon 0x3B, comma 0x2C, space
0x20.
Customized
character
Set a custom terminator value, which falls
within 0x00-0xFF
