User's manual
Guangzhou Andea Electronics Technology Co., Ltd.
16/18
http://www.gzandea.com
Note
: Step 1: Select the menu "ISO Multi-Tag Test" in the main interface of the
software;
Step 2: Select the "Inventory Operation" in the drop-down list above the "Start"
button;
Step 3: Click the "Start" button to carry out the inventory testing.
5.2.2.
Single-tag operation testing
In the main interface of R-Tool test software, select "Single Tag Test" and carry
out procedures as shown in the following figure
①
,
②
,
③
,
④
and
⑤
for tag operation
testing:
User's manual
Guangzhou Andea Electronics Technology Co., Ltd.
9/18
http://www.gzandea.com
As shown above (Step ), click the "Start" button to enter the main interface of
④
the test software.
5.1.
Description of configuration parameters
After the software and the device are successful connected, enter the
configuration interface and click parameter configuration to configure the interface
data, RF parameters, inventory parameters, working mode and other parameters of the
device:
Note: All c hanged configuration parameter s must be
saved by clicking [W rite]button and then clic king [Save]
button. Otherwise, the setting is invalid.
