AND AD-4406 OP-04, Инструкция по эксплуатации

Страница: 27 / 61

AD-4406 Weighing Indicator
Page 25
Comparator
Item Parameter Description
* 0 Not used
1 Upper/lower limit comparison (2 Limits setting)
2 Upper/lower limit comparison (Target and allowance)
3 Upper/lower limit comparison (Target and % allowance)
4 HH/Hi/OK/Lo/LL comparison (4 Limits setting)
5 HH/Hi/OK/Lo/LL comparison (Target and allowance)
6 HH/Hi/OK/Lo/LL comparison (Target and % allowance)
7 Check weighing 1
8 Check weighing 2
9 Check weighing 3
10 Simple batch 1
11 Simple batch 2
F22
Comparator function
12 Simple batch 3 (Loss in weight)
10/11 Includes zero band (1)
20/21 Includes minus (1)
30/31 Stable (0) /All time (1)
F23 (F22=1-6)
[Type2]
Validation of
comparison
40/41 All time (0) /Start, stop (1)
Initial settings are
11,21,31,40
10/11 Tare when start (1)
20/21 Stop after Full by key (0) /Auto (1)
30/31
Over/Under judgment:
after dribble flow (0) / Batch finish (1)
F23 (F22=10-12)
[Type2]
Sub function for
batch weighing
40/41 Start with press and hold TARE (1)
Initial settings are
11,21,31,40
* 0 Over
1 Under
F24
Relay output
selection
2 Finish/Full (F22=9,10,12)
Effective when
F22=7,9,10,12
F25
Batch finish output time 0.0 to
9.9
Relay on time by 0.1second step
(0.0:continuous to zero band) Initial setting is
0.0
F26
Zero band
-999999 to 999999 Initial setting is 0
*: Initial settings
Hold Function
Item Parameter Description
* 0 No hold
1 Manual hold
2 Auto hold
F27
Hold mode
3 Manual/auto hold
F28
Averaging time 0.0 to
9.9
Averaging time by 0.1second step
(0.0:hold at averaging start) Initial setting is
0.0
*: Initial settings
6.2. F-Functions