Page
8
AD-4406 Weighing Indicator
4. Description of Panels and Symbols
4.1. Front Panel Description
No. Name
Description
1 STABLE
Indicates when the display is stable.
2 NET
Indicates when the weight is the net weight.
3 ZERO
Indicates when the displayed weight is in the Zero range.
4 READY
Indicates the state of comparison or batching.
5 BATT
Indicates when the battery is low.
6 M+ (Accumulation) Indicates when there is a result of addition or accumulation.
7
(Triangle mark) Depending on the function selected, indicates various states.
8 HI/OK/LO
Indicates the results of comparison.
9 Data
display
Displays the weight data.
10 Unit of measure
Unit used to weigh
ZERO key
The key to zero the current display.
11
key
The key to select the digit while in the setting mode.
TARE key
The key to perform tare.
12
key
The key to select a value while in the setting mode.
NET/GROSS key
The key to select net or gross weight in the display.
13
+/- key
The key to or – of a value.
F1 key
The key to execute the setting.
14
ESC key
The key to proceed to the next step without storing the data
set.
F2 key
The key to execute the setting.
15
ENTER key
Confirms settings and stores the value.
16 ON/OFF key
Turns the indicator on and off.
17 CAL key
The key to select calibration.
18 CAL
cover
Calibration protection cover.
4. Description of Panels and Symbols
CAPACITY
AD-4406 WEIGHING INDICATOR
F 2
ENTER
+/
1
2
3
F 1
ESC
TARE
ZERO
C A L .
1
8
2
3
9 10
11
12
4 5 6 7
13
14
15
16
17
18
