Maintenance and care
36
Edition 02.19
qTOWER
3
84 / qTOWER
3
84 G
The pivotable holder for the
color modules is now accessi-
ble.
6. Note the code on the color module and
the position in which the color module
is to be installed.
7. Place the color module onto the free
position with the pin pointing down.
The silver pin points to the motor axis
and must engage in the centering hole
next to the large hole for the pin of the
color module.
Note:
The correct position of the color
module is found quicker if you rotate
the color module slightly around its
own axis during insertion.
Press the color module until it rests flat
on the rotor.
8. Screw on the color module with the M2 screws supplied.
9. Repeat this procedure for all color modules.
10. Close the remaining openings of the rotor with the color module dummy ele-
ments supplied.
Note:
The dummy elements seal the openings light-proof. If you want to install addi-
tional color modules at a later time, unscrew a dummy element from the rotor
and install the color module in its place.
