Analytik Jena 845-00003-03, Руководство пользователя

Страница: 30 / 77

18 2015
Safety Notes
3.8.4 Fundamental Maintenance & Care Rules

System maintenance may not be carried out by anyone other than service
personnel of Analytik Jena AG or expert personnel properly trained and duly
authorized by Analytik Jena AG.

Unauthorized maintenance work may cause damage to the system. For this
reason, operating personnel are not allowed to carry out work of any kind other
than described in chapter (

„Maintenance & Care” on page 53 ).

Always turn system power off before you perform work for maintenance or
cleaning of the system. Pull the main power plug from the power socket at first.

Use a slightly moistened (not dripping-wet) piece of cloth to clean exterior
surfaces.

Use only original accessory items and original spare parts or such accessories and
spare parts that are recommended by Analytik Jena AG
(

„Accessories & Spare Parts” on page 61 ).
3.8.5 Handling of Dangerous Substances
The system owner will be solely responsible for compliance with all safety requirements
in place for the protection of persons and material goods during work involving
radioactive, infectious, toxic, etching, combustible and other dangerous substances.
The system owner/operator is advised to establish a special operating practice for
system operation with involvement of dangerous substances. This User Manual includes
no safety notes aimed at preventing personal injury or material damage that may be
caused by substances being examined.
3.8.6 Chemical Resistance
Analytik Jena AG will refuse any responsibility where aggressive substances are examined
of a kind that may impact the system or its components in terms of stable performance.

Particular caution should be used when handling leaches, acids or organic
solvents, because these may reduce the system's lifetime.

Use only substances that are compatible with the materials quoted herein.