124
ANALOGUE SYSTEMS RS-INTEGRATOR
Are you sure?
NO
Yes
Factory defaults
(press "EDIT")
Factory defaults
This allows you to reset the
operation of the RS290 to the
factory defaults.
Be careful how you use this; the
operation cannot be undone and,
if you wish to re-use effects that
you previously created, you will
need to reprogram or (if
appropriate) reload any of your
own effects, sounds or settings.
Show pot values
The screen displays the knob
values as follows.
Upper row:
• Input gain
• Repeat speed / Sample start
• F/B gain / Sample end
• Wet/Dry mix
Lower row:
• Assign / Sample pitch
• RS295 Assign 2 (if connected)
Note:
The Wet/Dry mix value is
only shown when the
Bypass on/off switch is set
to On.
If CVs are received at the
following inputs, the readouts
show the values generated by the
sum of the knob positions and
the input voltages.
Upper row:
• -
• Repeat speed / Sample start
• F/B gain / Sample end
• -
Lower row:
• Assign / Sample pitch
• RS295 Assign 2 (if connected)
Triggers:
The two dash "-" marks report
when triggers are received at
TRIG1 or TRIG2 by changing to
hash "#" marks.
Clock:
The asterix in the top righthand
corner shows the clock, which is
by default triggered by TRIG1.
