142
ANALOGUE SYSTEMS RS-INTEGRATOR
THE FRONT PANEL
In Sample mode, the front panel controls, inputs and outputs operate as follows:
Controls
•
INPUT GAIN
Adjusts the input level in the range -80dB to +3dB
•
SAMPLE START
Adjusts the start point for the sample playback and/or loop
•
SAMPLE END
Adjusts the end point for the sample playback and/or loop
Note:
If the end point is less than the start point the sample will not play
•
WET/DRY MIX (Affects OUT L only)
Balances the audio signal being received at the SIGNAL IN input with the output of the existing
sample (if being played back).
- When fully anticlockwise (DRY) only input signal is heard
- When fully clockwise (WET) only the sample is heard
When no signal is being received at the SIGNAL IN input, this knob acts as an output level
control for the sampler.
•
BYPASS
When switched to Bypass, this determines that the output contains only input signal. It is
equivalent to rotating the WET/DRY MIX knob to its fully anticlockwise position.
