ANALOG WAY
SMS100 - ED 07/01
PAGE 9
5) STARTING (continued)
•
COMPONENT VIDEO INPUT (Y, R-Y, B-Y)
The Component Video signal, also called YUV (Y, R-Y, B-Y), or BETACAM™, is widely used in
broadcasting and is available on high-quality DVD players. The COMPONENT signal is transmitted with 3 coaxial
cables, and also have a better quality picture than COMPOSITE and S.VIDEO signals. The COMPONENT connectors
are usually RCA (x3), or BNC (x3) connectors.
CONNECTION
•
COMPUTER INPUT
This input is used to pass-though any High-definition or Computer signals. The signal connected to this input is
sent directly to the display output. Also you may connect a Computer source (PC, MAC, WORKSTATION), or a high
definition source (progressive DVD player, HDTV). Use the VGA supplied cable (HD15 male/male) to connect a PC.
For the others sources you may required some adapters (not supplied).
•
DISPLAY OUTPUT
The SMART SCALER™ is equipped with a 5 BNC connectors output. If your display device is equipped only
with a HD 15 connector : use the BNC to HD 15 supplied cable (please see connection scheme below).
The SMART SCALER™ can display a RGBHV (H & V Separate Sync.) or a RGBS (Composite Sync.) signal.
If your display device accept only Composite Sync, connect the C.SYNC cable to the H BNC of the SMART
SCALER™ and select COMP (Composite Sync.) in the LCD menu # 2-1 (Please see chapter 6).
CONNECTION
